Operating Range Of Remote Control Unit; Installing The Receiver; Opening The Front Panel - Pioneer Elite VSX-47TX Operating Instructions Manual

Before You Start

Operating range of remote control unit

The area in which you can use the remote control to operate the VSX-47TX is fairly large. To use, point the
remote control toward the remote sensor on the front panel of this unit while within the range shown below.
Remote control may not function properly if:
• There are obstacles between the remote control and
the remote sensor.
• Direct sunlight or fluorescent light is shining onto the
remote sensor.
• The receiver located near a device emitting infrared
rays.
• Operated simultaneously with another remote control
which uses infrared rays.

Installing the Receiver

CAUTION!
• Do not cover this unit in any way, for exam-
ple with a sheet or piece of cloth. This would
prevent proper heat dispersal.
• Do not any place object directly on top of
this unit. This also would prevent proper heat
dispersal.
• Be sure to leave adequate ventilation space
around the amp! When installing in a rack,
shelf, etc., be sure to leave more than 8
inches of space above the receiver.

Opening the Front Panel

To open the front panel push gently on the lower third of the panel with your finger.
8
30
30
23 feet (7m)
8 inches (20 cm)
Receiver