Remote Control Of Other Components; Setting Up The Remote Control To Control Other Components; Recalling Settings Stored In The Remote Control - Pioneer Elite VSX-47TX Operating Instructions Manual

Remote Control of Other Components

Remote Control of Other Components
Setting Up the Remote Control to Control Other
Components
In addition to controlling the receiver, the supplied remote control can operate your other components (VCR, TV,
DVD, CD, etc.) after you program it to do so. In this way, instead of fumbling with many different controls and
buttons, you only need to use one remote control. If your component(s) are listed in the remote control's
memory, simply follow the steps below. If your component(s) are not listed, or if you want the remote to learn
additional operations, you can use the learning mode to input the information from the remote controls supplied
with your other components.

Recalling Settings Stored in the Remote Control

The following steps show you how to recall the setting stored in the remote control. Once a setting is recalled
and the component assigned, you can use this remote to easily operate the component.
• To exit from the remote control setup mode at any time, press REMOTE SETUP.
memo
• See "Using Remote Control with Other Components" on pages 66 and 67 to operate your other com-
ponents.
• The display will disappear after one minute or so if no new commands are entered. Press any button
to 'wake up' the remote and continue the process.
3
2-5
memo
The TUNER button cannot be assigned.
62
SETUP
S0URCE TV SYSTEM RECEIVER
OFF
DVD/LD TV SAT TV CONT
MULTI CONTROL
VCR1/ MULTI
VCR2 VIDEO
OPERATION
DVR
CD-R/
CD TUNER RECEIVER
TAPE1
DIMMER INPUT ATT LOUDNESS SPEAKER A/B
1 2 3 4
VIDEO SEL SIGNAL SEL TAPE 2 EFFECT/CH SELL
5 6 7 8
– + +
TONE BASS/TREBLE
10 DISC
9 0
ENTER
DIRECT ACCESS DISP MODE
1
SYSTEM SETUP REMOTE SETUP
MENU
TUNER EDIT
ENTER
STATUS EXIT
GUIDE RETURN
MPX
DTV ON/OFF
¶ 8
EXTRA MENU
– +
TUNING BAND TUNING
1 3 ¡
– +
STATION DTV MENU CLASS STATION
4 7 ¢
– +
CHANNEL CHANNEL
TV INPUT INPUT
TV CONTROL
TV VOL MIDNIGHT VOLUME
TV CH
DIGITAL
NR
STEREO
THX STANDARD MUTE
/DIRECT
SURROUND
LISTENING
ADVANCED ADVANCED MODE
CINEMA CONCERT
(DVD-A/SACD)
ACOUSTIC MULTI CH LISTENING
LIGHT
CAL INPUT CH SELECT
Î
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
AXD7290
1 Press the REMOTE SETUP button for
three seconds.
The REMOTE SETUP menu appears on the remote
display.
2 PRESET should be selected (if it isn't
use the 5∞ buttons to select it) and
press ENTER.
SELECT FUNCTION blinks in the display.
3 Press the MULTI CONTROL button
(for example, DVD/LD) you want to
set.
4 Use the 5∞ buttons to select the
component you want to set up.
Press ENTER.
MAKER appears in the remote control display.
5 Use the 5∞ buttons to select the
name of the company that makes
your component.
The company names appear in the remote control
display. If there is more than one component type for
that company that makes your component then –1, –2,
etc., will appear in the display. Choose one of the
types and see if that works.