Speaker Placement; Multi Ch In Select - Pioneer Elite VSX-47TX Operating Instructions Manual

Advanced Setup

MULTI CH IN SELECT

If you have two surround back speakers, and connected a source, such as a DVD-Audio player, to the analog
multi-channel inputs, you can use this setting to control how the surround and surround back channels are
routed. This will allow you to make the most of your speaker system, enabling you to play 5.1 channel
sources through all of your speakers.
There are three OUTPUT MODE settings:
THROUGH: The surround channels are played through the surround speakers; the surround back channels
are played through the surround back speaker(s).
S =SB: The surround channels are played through the surround back speakers only.
S=S & SB: The surround channels are played through the surround and surround back speakers. We
recommend this setting for 5.1 channel soundtracks.
S0URCE
DVD/LD
MULTI CONTROL
VCR1/
DVR
CD
DIMMER
1
VIDEO SEL SIGNAL SEL
5
TONE BASS/TREBLE
9
SYSTEM SETUP
MENU
TUNER EDIT
STATUS
GUIDE
MPX
¶
1
4.Expert Setup
[1. OSD Adjustment ]
[2. Bass Peak Level]
[3. D-Range Control]
[4. Multi-Ch In
[5. Function Rename]
[6. Multi-Room Setting]
[Return]
2
3.4. Multi-Ch In Select
Output Mode
[Return]
3
3.4. Multi-Ch In Select
Output Mode
[Return]
94
SETUP
TV SYSTEM RECEIVER
OFF
TV SAT TV CONT
MULTI
VCR2 VIDEO
OPERATION
CD-R/
TUNER RECEIVER
TAPE1
INPUT ATT LOUDNESS SPEAKER A/B
2 3 4
TAPE 2 EFFECT/CH SELL
6 7 8
– + +
10 DISC
0
ENTER
DIRECT ACCESS DISP MODE
REMOTE SETUP
1~5
ENTER
EXIT
RETURN
DTV ON/OFF
8
EXTRA MENU
Select]
[Through]
[ S SB ]
Follow steps 1-3 on page 90, if necessary, to get to the
starting point mentioned here.
1 MULTI-CH IN SELECT should be
selected if it isn't use the 5∞ buttons
to select it. Press ENTER.
2 Use the 2 3 buttons to choose a type
of output mode: THROUGH, S =SB,
S=S & SB.
3 Use the 5∞ buttons to select RETURN.
Press ENTER button.
Your MULTI CH IN SELECT output set. Next, move on to
FUNCTION RENAME, if necessary.
If you want to change a setting before proceeding
Start over from step one.
4 If you want to continue EXPERT SETUP
use the 5∞ buttons to select the next
setup and press ENTER.
5 If you want to finish EXPERT SETUP
use the 5∞ buttons to select RETURN
and press ENTER. Then use the 5∞
buttons to select EXIT and press
ENTER.
memo
• For details on speaker placement
in this mode see page 103.
• If you select S=SB or S=S & SB,
the surround back MULTI CH IN
jacks are switched off.