Protimeter MMS2 Instruction Manual page 23

4.7b Date and Time
Navigate to
SELECT MODE -> SETTINGS -> DATE AND TIME
change the date and time. Use
/ to increment/decrement the value in that box.
After entering the required date and time, press
The new date and time are displayed at the top right corner of the screen. Date
and time can also be set up by connecting to a PC and using the optional
MMS2 logging software.
4.7c Auto Off
The MMS2 will switch
activity/key press is observed. Navigate to
and press to configure the Auto off time. Use
AUTO OFF
navigate between 0 to 6 minutes and press
disable the Auto off feature, set the Auto switch off time to 0.
During continuous logging operation, auto switch off time is
Note:
considered to be the display turnoff time.
4.7d Set Brightness
Navigate to
SELECT MODE -> SETTINGS -> SET BRIGHTNESS
set the Brightness level. Use
brightness levels (1 to 10) and press
(Brightness level 2 is the default setting.)
INS8800 Rev. D
to navigate to the required field. Then, use
automatically after auto switch off time, if no
OFF
/
Protimeter MMS2 Instruction Manual
to set the date and time.
SELECT MODE -> SETTINGS ->
to set the Auto off time. To
to navigate between the different
to set the desired brightness.
and press to
/ to
and press to
17