Condensator - Protimeter MMS2 Instruction Manual

Table of Contents

Advertisement

4.5 Condensator

The Condensator Mode enables the user to assess the risk of condensation
occurring on surfaces or to confirm whether or not condensation is present on
a surface.
The MMS2 can be used as a Condensator using two modes:
4.5a Surface Temperature Probe (Contact Based) - Selection
and Use
Navigate to
SELECT MODE -> SURFACE TEMPERATURE PROBE
select the Surface Temperature Probe mode.
In this mode, the MMS2 measures the surface temperature using an external
Surface Temperature probe inserted into socket
surface to be assessed. In addition to the Surface Temperature probe, connect
a Humidity probe into socket
status.
is a useful function when investigating condensation, as it tells the user
TDIFF
how many degrees a surface temperature is above or below the prevailing dew
point temperature.
4.5b Surface Temperature IR (Non-Contact Based) - Selection
and Use
In this mode, the MMS2 measures surface temperature using IR technology
Connect a humidity probe into socket
Hold the
button to enable the IR Thermometer. Release the button and
press it again within 1 second to enable the
will indicate the area on the surface where the measurement is being taken
(see Figure 5 on page 14).
INS8800 Rev. D
for the MMS2 to show the Condensation
A
.
A
LASER
Protimeter MMS2 Instruction Manual
and press
and making contact with the
C
pointer. The
to
pointer
LASER
13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MMS2 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents

Save PDF