Protimeter MMS2 Instruction Manual
3.1 Switching the MMS2 ON and OFF
Prior to initial use, ensure that a 9V battery is correctly inserted in the battery
compartment.
The battery status is indicated by an icon
Note:
the LOW BATTERY message appears, replace the battery.
To switch the MMS2
The MMS2 switches
Note:
observed, unless the default settings are changed (see Section 4.7c,
"Auto Off", on page 17 for instructions).
To switch the instrument
3 seconds. Once
SWITCHING OFF THE DEVICE
text string disappears and the unit switches
Whenever the battery voltage falls below the threshold value, the
message appears. If the battery voltage falls below the operating
BATTERY
level, the instrument prompts with the message:
4
, press the power button
ON
automatically after 2 minutes if no activity is
OFF
immediately, press
OFF
has been depressed for 3 seconds or more, the text string
appears on the display. When
LOW BATTERY
SWITCHING OFF THE DEVICE
on the display. When
momentarily.
and hold for at least
.
OFF
is released, the
LOW
INS8800 Rev. D
Need help?
Do you have a question about the MMS2 and is the answer not in the manual?