Location Of Cdc Driver In Installed Firmware Package - Texas Instruments TRF7970A BoosterPack Getting Started Manual

www.ti.com
3. Browse to the driver software, which is located at [Installed Path]\usblib\USB_config (see
Figure 8. Location Of CDC Driver in Installed Firmware Package
4. After selecting the USB_config folder, click OK and then click Next.
5. There is a warning regarding the driver signature. Click continue to finishing installing the driver.
6. Now the CDC driver should be installed and the LaunchPad development kit can be connected to the
TI NFC Tool GUI.
2.5 Change Jumper for Older DLP-7970ABP BoosterPack Plug-in Modules
If you are using a BoosterPack plug-in module version 4.4 or older, the IRQ jumper may need to be
changed. See DLP-7970ABP Hardware Update Overview
SLOU452 – December 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
for more information.
NFCLink Standalone Getting Started
Getting Started
Figure 8).
11