Siemens SITRANS F M MAG 8000 Operating Manual page 32

MAG 8000 & MAG 8000 CT
Index 5
Customer totalizer
Display test
Menu selection
Index 0 (when active)
Call out reset
32
5. Operation
SFIDK.PS.026.D9.02
Customer totalizer 3 indicates the totalized
volume since it was last reset. The totalized
volume follows totalizer 1 and the display "r"
indicates that it can be reset by activating a long
key function. When pressing the key while the
"r" is flashing, the totalizer 3 value will reset to
0 and the actual date and time will be stored
permanent in memory. The display information
will now alternate between customer volume
and the reset date.
All segments of the display are alternately
flashed on and off during this test.
By activating a middle key function, the menu
selection will flash indicating that a new
selection can be made.
After toggling to the menu of choice, a middle
key function will enter the selected menu.
Call-up reset window (index 0) is only shown
when the call-up function is activated. The "r"
indicates it can be reset by activating a long key
function. When releasing the key while the "r"
is flashing, the call-up function will be reset and
the window disappears.