Table of Contents
Advertisement
PRINT PLATFORM REMOVAL AND INSTALLATION
1 .
Ensure the printer is turned on and the Printer State is in
or
Standby
mode .
NOTE: This is the normal state you should find the
printer in when you open the door .
NOTE: Make sure you are wearing nitrile gloves
before performing this procedure . Always protect
yourself from possible exposure to materials .
2 .
Select the
Access Platform
touchscreen .
NOTE: The Access Platform will not be available
to select if the printer is not ready for the user to
access the print platform .
3 .
The printer will move the plate into place in order to allow
access to the build platform . When prompted, open the door
to access the print platform .
4 .
Wearing nitrile gloves, lift platform off of plate .
3D Systems, Inc.
button on the printer
Idle
31
Advertisement
Table of Contents
