Status:preset; Status:questionable[:Event] - Keithley 2280 Series Reference Manual

Series 2280 Precision Measurement DC Power Supplies Reference Manual

:STATus:PRESet

This command resets all the device-dependent enable registers.
Type
Command only
Usage
:STATus:PRESet
Details
Sending this command can reset the bits of the following enable registers to 0:
 Operation Event Enable Register
 Operation Instrument Event Enable Register
 Operation Instrument Summary Event Enable Register
 Measurement Event Enable Register
 Measurement Instrument Event Enable Register
 Measurement Instrument Summary Event Enable Register
 Questionable Event Enable Register
 Questionable Instrument Event Enable Register
 Questionable Instrument Summary Event Enable Register
Example
:STAT:PRES
Also see
None

:STATus:QUEStionable[:EVENt]?

This command reads the Questionable Event Register.
Type
Query only
Usage
:STATus:QUEStionable[:EVENt]?
Details
This command reads the Questionable Event Register of the status model and then clears the
register.
The instrument returns a decimal value that corresponds to the binary-weighted sum of all bits set in
the register. For details, see
Example
:STAT:QUES?
077085501 / February 2015
Affected by
Not applicable
Affected by
Not applicable
Questionable Event Register
Returns the contents of Questionable Event Register
Section 7: SCPI command reference
Where saved
Not applicable
Reset all the enable registers to 0.
Where saved
Not applicable
(on page D-12).
Default value
Not applicable
Default value
Not applicable
7-91