Initial Start-Up - Webasto GBW 300 Installation Instructions Manual

Initial start-up

GBW 300
16 Initial start-up
NOTE:
Refer to the safety instructions in the operating and maintenance
instructions.
Read the operating and maintenance instructions before starting the
heater.
After you have installed the heater, bleed the water system carefully.
Follow the instructions supplied by the vehicle manufacturer for this
purpose. All the shut-off cocks in the circulation system must be opened.
Conduct a trial of the heater to check all the water connections for leaks
and to ensure that they are secure. If the heater suffers a fault during
operation, the fault must be located and remedied.
56