Initial Start-Up - Webasto THERMO 90 S Installation Instructions Manual

Visit www.butlertechnik.com for more technical information & downloads.

Initial start-up

Thermo 90 S / Thermo 90 ST
11 Initial start-up
NOTE:
Refer to the safety instructions in the operating and maintenance
instructions.
The operating and maintenance instructions must be read through
without fail before starting the heater.
After you have installed the heater, bleed the water system and the fuel
supply system carefully. Follow the instructions supplied by the vehicle
manufacturer for this purpose.
Conduct a trial of the heater to check all the water and fuel connections
for leaks and to ensure that they are secure. If the heater suffers a fault
during operation, the fault must be located and remedied.
62
www.butlertechnik.com