Wall (Surface) Mounting - 2N Access Unit Installation Manual

Wall (surface) mounting

(concrete and steel structures, entry barrier columns, interiors, etc.)
What you need for mounting:
®
2N Access Unit
a proper frame
1 module: frame Part No. 9155021
2 modules: frame Part No. 9155022
For uneven surfaces use a backplate for the required count of modules, Part Nos.
9155061 9155062 –
Caution
The warranty does not apply to the product defects and failures arisen
as a result of improper mounting (in contradiction herewith). The
manufacturer is neither liable for damage caused by theft within an area
that is accessible after the attached electric lock is switched on. The
product is not designed as a burglar protection device except when
used in combination with a standard lock, which has the security
function.
When the proper mounting instructions are not met, water might get in
and destroy the electronics. It is because the intercom circuits are under
continuous voltage and water infiltration causes an electro-chemical
reaction. The manufacturer's warranty shall be void for products
damaged in this way!
2N TELEKOMUNIKACE a.s., www.2n.cz 30/98