Device Restart; Factory Reset - 2N Access Unit Installation Manual

OUT1
OUT1 active output terminals for connection of
electric lock: 8 up to 12 V DC depending on power supply (PoE: 10 V; adapter: power
supply voltage minus 2 V), up to 400 mA
RELAY1 RELAY1 terminals with accessible 30 V / 1 A AC/DC NO/NC contact
12V/2A
External supply terminals for
modules)
RESET RESET / FACTORY RESET button
RJ-45 RJ-45 adapter connector – no need to use the PoE, RD and TD terminals for this
connector
Tip
Wiring diagram of IN1, IN2 and IN3 terminals in active mode
Wiring diagram of IN1, IN2 and IN3 terminals in passive mode

Device Restart

Press the RESET button (between the LED indicators in the right-hand upper part)
shortly to restart the device.

Factory Reset

2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N
®
2N Access Unit – 12 V / 2 A DC (3 A for multiple
Helios IP Security Relay or
70/98