Bluetooth Module; Fingerprint Reader - 2N Access Unit Installation Manual

Bluetooth Module

The Bluetooth module (
open doors using Android and iOS based smartphones via the Bluetooth
protocol 4.0 as RFID card replacement. Install the
from Google Play
application requires phones with Android OS 4.4 and higher and iOS 9 and
higher.
The module contains two
The two connectors are fully interchangeable and can be used both as inputs
from the main unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The package includes a 220 mm long interconnecting cable.
The module uses the 2.4 GHz frequency.
IDs from the following smart phones can be read:
Android 4.4 and higher
iPhone 4S and higher

Fingerprint reader

The Fingerprint reader
control and intercom control.
The module contains two
These two connectors are fully interchangeable and can be used both as inputs
from the main unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
Important module properties:
FBI PIV and Mobile ID certification – FAP20
Durable glass touch surface
Rejects spoof fingerprints
-20 to 55 ºC operating temperature range,
0–90% relative humidity, noncondensing
I/O Module
2N TELEKOMUNIKACE a.s., www.2n.cz
Part No. 9155046
and Appstore to m
®
2N Access Unit
with iOS 8 and higher
is used for automated verification of human fingers for access
®
2N Access Unit
) helps authenticate and subsequently
®
2N Mobile Key
ake authentication work properly. The
bus connectors.
bus connectors.
application
79/98