Controllable Single Point (Spc) - ABB COM600 Series User Manual

3.4.5.15.
44
COM600 series, Version 5.0
DNP 3.0 Serial Slave (OPC) User's Manual
Property/ Para- Value or Value range/ Default
meter
Update Rate 0...65535
Default: 1000
Data Class Spe-
cific
Indication Object Analog input (30, 32)
Analog output (40)
Default: Analog input (30, 32)
Send All Updates True
False
Default: False
Send As 16 Bit Send as 32 bit value
Value
Send as 16 bit value
Default: Send as 16 bit value
Time And Type Send as static data (always
Variation without time)
Event without time
Event with time
Event with relative time (valid
for binary inputs only)
Default: Event without time
Scale and Unit
Multiplier 1...1000000000
Default: 1

Controllable single point (SPC)

Table 3.4.5.15-1 Configurable SPC properties for OPC client
Property/ Para- Value or Value range/ Default
meter
Basic
Common Data SPC
Class
Addresses
Description
Maximum update rate of signal state
changes between the OPC server and
client in milliseconds. 0 means that the
server sends all the changes to the client.
Object number for indication.
Defines if all changes in value are sent to
the master.
Defines if the value is sent as 16 or 32 bit
value.
Specifies the type of the timestamp a
message is sent with.
Multiplier for scaling decimal values.
Description
Common data class according to IEC
61850.
1MRS755495