Configuring Data Objects; General Information About Configuring Objects - ABB COM600 Series User Manual

Version 5.0, dnp 3.0 serial slave opc

Hide thumbs Also See for COM600 Series:

Table of Contents

1MRS755495

3.4.5.

3.4.5.1.

COM600 series, Version 5.0

DNP 3.0 Serial Slave (OPC) User's Manual

Configuring data objects

After the objects have been added, configure the object properties. Figure 3.4.5.1-1 shows

an example of how to use SAB600 to configure the object properties for DNP OPC

Server.

To configure an object:

1. Select an object in the object tree of the communication structure.

2. The object properties appear now in the Object Properties window. The properties

and their values can be viewed as shown in Figure 3.4.5.1-1.

Figure 3.4.5.1-1 Example of object properties in the Objects Properties window

3. Select the property you want to configure. Depending on the property value type,

configure by:

•

Selecting a predefined value from a drop-down menu, or

•

Entering a text string or a numerical value in a text field.

The available properties for different objects are listed in the following subsections.

SAB600_DNP_Serial_Slave_Object_Properties.png

Table of Contents