Configuring Dnp Serial Slave Opc Client Properties - ABB COM600 Series User Manual

1MRS755495
3.4.2.
COM600 series, Version 5.0
DNP 3.0 Serial Slave (OPC) User's Manual
Clicking Save connects the data objects to the DNP Serial IED. After clicking Save the
connected data objects appears as child objects for the respective DNP Serial IED. The
cross reference information can then be also modified by selecting the data object and
using the object properties window.
If you change the object names or structuring of objects of OPC Server, which are con-
nected to the DNP Serial IED, re-open the cross reference tool and verify that the changes
are correctly handled and then click Save to update the DNP configuration accordingly.
DNP Serial Slave OPC Client supports data objects for status, measurements, controllable
status, and controllable analog information. The following subsections list the configurable
data object properties for the DNP Serial Slave OPC Client.

Configuring DNP Serial Slave OPC Client properties

Table 3.4.2-1 lists the configurable DNP Serial Slave OPC Client properties and value
ranges for them. The actual configuration by using SAB600 is performed as described
in 3.2, Overview of configuration.
Table 3.4.2-1 DNP Serial Slave OPC Client properties
Property / Para- Value or Value range/ Default
meter
Basic
Maximum OPC 0...65535
Server Initialization
Default: 5
Time
Prog ID AE
ProgID DA
Time Zone Correc- -720...720
tion
Default: 0
Station/Remote
Switch
Station/Remote Do not check Station/Remote
Switch Handling switch position.
Check Station/Remote switch
position.
Default: Do not check Sta-
tion/Remote switch position.
Description
Specifies the maximum time in seconds
that any connected (configured) OPC
Server requires to retrieve all its initial
data.
Instance identification of diagnostic OPC
alarm and event server.
Instance identification of diagnostic OPC
data access server.
The value of this property in minutes is
added to the synchronization time received
from a DNP master.
Specifies if a position check for the station
remote switch is going to be made.
21