Printing - Welch Allyn Spot Vision Screener VS100 Directions For Use Manual

Directions for use
To configure network IP settings
1. Touch TCP/IP.
The network address and settings display on the screen.
2. To manually configure the network IP configuration, touch Static. When finished,
touch OK.
3. Touch OK to save the changes and return to the previous screen.

Printing

To print screening results, you must connect the vision screener to a printer on a
wireless network or connect to a printer using a USB cable. Set the printer you want to
print to as the default printer. The vision screener is capable of printing to most wireless
network printers. However, it is not guaranteed that every printer works with the vision
screener.
The Available Printers screen displays all the printers that have been added to the vision
screener. For most printers, all you need to do to print is select the printer from the Add
Printers screen, add it to the Available Printers screen, and set it as the default printer.
For more information, see To add a printer.
Some printers need you to select a print driver before you can set it as the default
printer. Print drivers help the printer to print your content in the correct format. If your
printer does not have a print driver associated with it, you need to tell the vision screener
which driver to use. For best results, select a print driver that matches the series number
of the printer. If the printer series is not listed, select a generic print driver that best
matches the type of printer you are using. The vision screener contains generic PCL
drivers that can be used with older printers, as well as a custom driver for label printers.
For more information, see To select a print driver manually.
If you do not see the printer you want on the Add Printers screen, you need to add the
printer manually, which requires you to add the printer's location and other details as
well as selecting a print driver. For more information, see To add a printer manually.
Note
To add a printer
For most printers, all you need to do is add the printer to the Available Printers screen
and set it as the default printer. If a default printer has already been set, it displays first.
An icon next to each printer indicates the type of connection.
1. If adding a USB printer, connect the USB cable from the printer to the vision
screener's USB port. If adding a network-connected wireless printer, make sure the
vision screener has been added to the wireless network.
2. Touch Tools, and then touch Printer.
The Available Printers screen displays all the printers that have been saved on the
vision screener.
3. Touch Plus.
In order to install the QL-820NWB on the vision screener, it must have
QL-820 in its name on the network and you must select the driver labeled
QL-820NWB from the driver list. Use Brother DK2205 Continuous Length
Paper Tape or equivalent.
Advanced settings on the vision screener 27