FUTABA T8J-2.4G Instruction Manual page 46

SUB-TRIM
the default being no SUB-TRIM .
The recommended procedure is as follows:
SUB-TRIM
GOAL of EXAMPLE:
its center exactly matches the aileron
Where next?
possible. Larger SUB-TRIM
restricted on one side.
TRIM RESET menu) and the SUB-TRIMs
STEPS:
SUB-TRIM until Open SUB-TRIM .
Choose the channel to adjust, and adjust
the values until the surfaces match. (Ex:
Repeat the other channel values.
Close.
Adjust trim steps: see p. 45.
Adjust END POINTs : see p. 36.
Set up dual/triple rates and exponential( D/R , EXP ): see p. 39.
46
SUB-TRIM values as small as
INPUTS:
for 1 second.
to SUB-TRIM .
to FLP
as needed. to each channel,
as needed.
SUB-TRIM