4.1
Setting Method
Set the items on the Transfer Setup screen.
Connection Destination window
2.
2.
3.
3.
1.
Select "Ethernet Board" for "PC side I/F".
2.
Select "PLC Module" for "PLC side I/F".
In the "PLC side IF Detailed Setting of PLC Module" dialog box, select the Ethernet Port Direct
Connection checkbox as shown below.
3.
Complete setting of "Other Station Setting".
Select an item appropriate to the operating environment.
CHAPTER 4 DIRECT CONNECTION TO PROGRAMMING TOOL (SIMPLE CONNECTION)
[Connection1]
1.
1.
29
4