Mitsubishi MELSEC L Series User Manual page 54

(2) Simultaneous broadcast
For simultaneous broadcast using UDP, set the parameters as follows.
• Destination IP Address: FF.FF.FF.FF
• Destination Port No.: FFFF
CPU module
(IP address: xx.xx.xx.xx, Subnet mask: 255.255.255.0)
Destination IP Address Destination Port No.
Other than FF.FF.FF.FF Other than FFFF
H
Other than FF.FF.FF.FF FFFF
H
FF.FF.FF.FF Other than FFFF
H
FF.FF.FF.FF FFFF
H
52
H
H
Ethernet
Sending data from port No.A of the CPU
Port No.A
module to each port No.N of all external
devices.
Receives only the data sent from the specified IP
address and port No. among the entire data sent to
H
the host station port No.
Receives the data sent from all ports of the specified
IP address among the entire data sent to the host
H
station port No.
Receives the data sent from the specified port No. of
all the IP addresses among the entire data sent to the
H
host station port No.
Receives all data that have sent to the host station
H
port No.
Port No.L
Port No.N
Port No.M
Port No.N
Port No.N
Receiving
External device 1
(IP address: xx.xx.xx.yy)
External device 2
(IP address: xx.xx.xx.zz)
External device 3
(IP address: xx.xx.xx.ww)
Sending
Sends data from the host
station port No. to the
specified IP address and port
No..
N/A
Sends data to the port No.
specified in the settings for
simultaneous broadcast.
N/A