Siemens SIMATIC S7-200 System Manual page 584

Index
Conversion instructions, 4-17
ASCII to HEX, 9-139
BCD to Integer, 9-130, 10-30
Byte to Integer, 9-133, 10-32
Decode, 9-135
Double Integer to ASCII, 9-142
Double Integer to Integer, 9-132, 10-31
Double Integer to Real, 9-130, 10-31
Encode, 9-135
HEX to ASCII, 9-139
Integer to ASCII, 9-140
Integer to BCD, 9-130, 10-30
Integer to Byte, 9-133, 10-33
Integer to Double Integer, 9-132, 10-32
Integer to Real, 9-132
Real to ASCII, 9-143
Real to Double Integer, 10-31
Round, 9-131
Segment, 9-137
Truncate, 9-131, 10-30
Converting
integer to real number, 9-93
loop inputs, 9-93
real number to normalized value, 9-93
Cosine instruction, 9-86, 10-22
Count Down Counter instruction, 10-16
Count Up Counter instruction, 10-15
Count Up/Down Counter, 10-16
Counter instructions, 9-24
Count Down, 10-16
Count Up, 10-15
Count Up/Down, 10-16
example, 9-25, 10-17
operation, 10-15, 10-16
Counters
addressing memory area, 5-8
CPU 221/222/224/226, 8-7
types, 5-8
variables, 5-8
CP (communications processor) card, 7-4
configuration with PC, 7-12
CP 243–2 Communications Processor
manual order number, E-2
overview, A-86
specifications, A-85
CP 5411, order number, E-2
Index-4
CP 5511
order number, E-2
setting up the MPI Card (PPI) parameters,
7-14
CP 5611
order number, E-2
setting up the MPI Card (PPI) parameters,
7-14
CPU
basic operation, 4-5
clearing memory, 4-29
error handling, 4-43
fatal errors, B-2
general technical specifications, A-3
going online, 3-9
hardware supported for network
communications, 7-3
ID register (SMB6), C-4
input simulators, specifications, A-93
memory areas, 5-2
memory ranges, G-3
modem connection, 7-25–7-30
module, 1-6
operand ranges, 8-8
password, 4-27
power requirements, 2-18
scan cycle, 4-22
selecting mode, 4-25
CPU 221
backup, 1-3
comm ports, 1-3
expansion modules, 1-3
features, 8-7
I/O, 1-3
I/O numbering example, 6-3
input filters, 1-3
instructions supported, 1-3
interrupts, maximum, 9-176
interrupts supported, 1-3
memory, 1-3
memory ranges, 8-7
operand ranges, 8-8
protocols supported, 1-3
summary, 1-3
S7-200 Programmable Controller System Manual
A5E00066097-02