Average Number / Time Constant Setting Area; Set Data Specification Area - LG G3F-AD4A User Manual

Chapter 6. BUFFER MEMORY CONFIGURATION AND FUNCTION
6.2.8 Average Number / Time Constant Setting Area (G3F-AD4A, G4F-AD2A : address 9 to 12, G3F-AD4B :
address 22 to 37)
1) Average number/time constant setting range is as follows.
(1) Average number setting range: 2 to 4000 (count).
(2) Average time setting range: G3F-AD4A, G3F-AD4B (96 to 12000 ms), G4F-AD2A (40 to 20000ms)
2) When setting value is out of the range, error code number 17 is written to buffer memory address 31 to
34 and the previous data remain as A/D conversion value.
3) When average number/time constant isn't set G3F-AD4A/G3F-AD4B of 96 and G4F-AD2A of 40 will
be set.
4) Average number/time constant setting is as follows.
Address
address 9
address 10
address 11
address 12
REMARK
Before average number/time constant value is set, average processing enable/disable
Specifying and number/time average processing setting have to be set.
6.2.9 SET Data Specification Area (G3F-AD4A/G4F-AD2A: address 13, G3F-AD4B: address 38)
1) When specified bit of each channel isn't turned on in the SET data specification area(addr ess 13), A/D
conversion isn't executed by A/D conversion module's data which users specified address 0 to 12 and the
previous data remains.(G3F-AD4A, G4F-AD2A)
2) SET data is specified as follows.
(1) G3F – AD4A
(2) G4F – AD2A
Address "13"
(2) G4F – AD2A
Address "13"
Average number/time constant setting to each channel
G3F – AD4A
Average number/time constant setting in block to
channel 0, 1, 2, 3,
Average number/time constant setting in block to
channel 4, 5, 6, 7
Average number/time constant setting in block to
channel 8, 9, 10, 11
Average number/time constant setting in block to
channel 12, 13, 14, 15
SET data specification [Bit Off(0) : Disable, Bit On(1) : Enable]
Ignored
6 - 10
G4F – AD2A
Average number/time constant setting
channel 0.
Average number/time constant setting
channel 1
Average number/time constant setting
channel 2
Average number/time constant setting
channel 3.
SET data specification
[Bit Off (0): Disable, Bit On(1) :Enable]