LG G3F-AD4A User Manual page 65

Chapter 6. BUFFER MEMORY CONFIGURATION AND FUNCTION
6.1.3 G4F-AD2A buffer memory
Address
(Decimal)
0. Available channel specification
1. Data output type specific ation
2. Filter processing specification
3. Filter constant setting to channel 0
4. Filter constant setting to channel 1
5 Filter constant setting to channel 2
6. Filter constant setting to channel 3
7. Average processing specification
8. Time/Number average specification
9. Average time/number setting to channel 0
10 Average time/number setting to channel 1
11. Average time/number setting to channel 2
12. Average time/number setting to channel 3
13. Set data specification
14. A/D Conversion value to channel 0
15. A/D Conversion value to ch annel 1
16. A/D Conversion value to channel 2
17 A/D Conversion value to channel 3
18. Channel operation data
19. Error code to channel 0
20 Error code to channel 1
21. Error code to channel 2
22. Error code to channel 3
Descriptions Detail descriptions
Bit on(1) : Channel enable
Bit off(0) : Channel disable
Bit on(1) : -8192 to 8191
Bit off(0) : -192 to 16191
Bit on(1) : Filter processing
Bit off(0) : Sampling processing
Setting range : 1 to 99
Bit on(1) : Average processing
Bit off( 0) : Sampling processing
Bit on(1) : Time average
Bit off(0) : Number average
Setting range
Ti m e average : 40 to 20,000(ms)
umber average: 2 to 4,000 (count)
Bit on(1):Change the buffer of address
0 to 12
Bit off(0):Remain the buffer of address
0 to 12 in the precious value
Bit on(1) : Operation
Bit off(0) : Operation stop
0 : Normal operation
16 : Fil t er constant setting range
exceeding
17 : Average number/time constant
setting range exceeding
6 - 4
Non-initialization
No allowance for use
Set the data output type to -192
to 16191
process by sampling
Set the filter constant to "1"
Process by sampling
Specify to number average
Set to the constant "40"
Non-specification
- -
Operation stop
-
Remark
Read/Write enable
Read only enable