Select Image File; Delete Image File; Make Storage Center - Kanguru KCLONE-7HDS-PRO User Manual

6.3.4 Select Image File

The Select Image File option is used to select an image file when the Skip Select Image option is
enabled. If Skip Select Image is enabled, the image file selected here will be used as the default
Source for any copy process.
To select an image file name:
1. Tap the 'ENT' button. The digit furthest to the left will start blinking, indicating that it is
currently selected. Tap the UP/DoWN buttons to increase/decrease the digit by one.
2. Tap the 'ENT' button to select the next digit to the right. Tap the UP/DoWN buttons to
increase/decrease the digit by one.
3. Repeat step 2 until you have entered the complete image name, then press and hold the 'ENT'
button to set the default file image.

6.3.5 Delete Image File

The Delete Image File option is used to delete a specific image file that has been saved to the Storage
Center.
To delete an image file:
1. Connect your Storage Center drive to the Source port.
2. Tap the 'ENT' button. The digit furthest to the left will start blinking, indicating that it is
currently selected. Tap the UP/DoWN buttons to increase/decrease the digit by one.
3. Tap the 'ENT' button to select the next digit to the right. Tap the UP/DoWN buttons to
increase/decrease the digit by one.
4. Repeat step 2 until you have entered the complete image name, then press and hold the 'ENT'
button to select the image file for deletion.
Note: If you receive a "File Not Found" error message, then there is no data saved to the image file
that you selected.

6.3.6 Make Storage Center

The Make Storage Center option allows you to format a normal drive as a Storage Center drive.
Storage Centers which can then be used to store multiple hard drive images for convenient access to
your most commonly used Master drives.
To format a hard drive as a Storage Center:
1. Connect the hard drive you want to format as a Storage Center to the duplicator's Source port.
2. Tap the 'ENT' button.
3. You will receive a message asking you to confirm formatting the drive. Tap the 'ENT' button
to proceed or tap the 'ESC' button to cancel.
Caution! Formatting the internal hard drive will erase any saved image files stored on the hard
drive.
Once the format has completed you will receive a message confirming that the format was successful.
51
Warranty Information