The Diagnostic Setup Menu - Kanguru KCLONE-7HDS-PRO User Manual

Kanguruclone 7hds, 15hds & 23hds pro duplicator
Table of Contents

Advertisement

6.4 The Diagnostic Setup Menu

The Diagnostic Setup menu will allow you to choose which disk diagnostic tests are enabled to run
when executing the Disk Diagnostic function (see section 4.6 Disk Diagnostic on page 25). Press
the UP and DoWN buttons to navigate through the options available under the Diagnostic Setup
menu.
Diagnostic tests that are enabled are marked with an asterisk [
between enabled/disabled.
• SET DIaG SMarT - S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a
monitoring system included in HDDs and SSDs that detects and reports on various indicators of
drive reliability, with the intent of enabling the anticipation of hardware failures.
• SET WrITE TEST - Checks the ability to write data to the target drives by sequentially writing
data to all sectors.
• SET rEaD TEST - Checks the ability to read data from the target drives by writing data to all
sectors and attempting to read them sequentially.
• SET raNDoM rEaD - Same as the Read Verify test, except sectors are written and read from
in a random pattern.
• SET raNDoM WrT - Same as the Write test, except sectors are written to in a random
pattern.
• SET DIaG. PaT. - Configure the data pattern value for Write and Random Write test
*
]. Tap the ENT button to toggle a test
52

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kclone-23hds-proKclone-15hds-pro

Table of Contents