The Setup Menus
6.2.11 Set ratio Start
Ratio Copy duplicates only a defined percentage of the Master drive. The Set Ratio Start option
allows you to define the starting point. The percentage of the disk duplicated from the start point is
defined by the Set Ratio Length option.
By default the Set Ratio Start is 0.0%, which is the very beginning of the drive.
Tap the 'ENT' button and then press the UP/DoWN buttons to change this option's setting.
Tap the 'ENT' button to set the Ratio Start point.
6.2.12 Set ratio Length
Ratio Copy duplicates only a defined percentage of the Master drive. The Set Ratio Length option
allows you to define the percentage of length to be duplicated. The starting point is defined by the Set
Ratio Start option.
By default the Set Ratio Length is 10.0%.
Tap the 'ENT' button and then press the UP/DoWN buttons to change this option's setting.
Tap the 'ENT' button to set the Ratio Length.
6.2.13 Set ratio Erase Start
Ratio Erase erases only a defined percentage of the Master drive. The Set Ratio Erase Start option
allows you to define the starting point. The percentage of the disk erased from the start point is
defined by the Set Ratio Erase Length option.
By default the Set Ratio Erase Start is 0.0%, which is the very beginning of the drive.
Tap the 'ENT' button and then press the UP/DoWN buttons to change this option's setting.
Tap the 'ENT' button to set the Ratio Erase Start point.
6.2.14 Set ratio Erase Length
Ratio Erase duplicates only a defined percentage of the Master drive. The Set Ratio Erase Length
option allows you to define the percentage of length to be erased. The starting point is defined by the
Set Ratio Erase Start option.
By default the Set Ratio Erase Length is 10.0%.
Tap the 'ENT' button and then press the UP/DoWN buttons to change this option's setting.
Tap the 'ENT' button to set the Ratio Erase Length.
45