Kanguru KCLONE-7HDS-PRO User Manual page 60

Duplicating in a Daisy Chain Configuration
Once connected, making disks copies with duplicators in a Daisy Chain configuration is similar to
making copies on independent, standalone systems.
1. Connect the Master disk to the Source port on Duplicator #1.
2. Connect Target disks to any remaining ports on any of the duplicators.
Note: A Target disk can be connected to the Source port on Duplicator #2 and it will be copied
to.
3. Navigate to the desired copy mode.
4. Press the 'ENT' button to start the duplication process.
60
Daisy Chain Connection