Storage Center Setup; Load Full Image; Copy Storage Source; Skip Select Image - Kanguru KCLONE-7HDS-PRO User Manual

6.3 Storage Center Setup

6.3.1 Load Full Image

The Load Full Image option allows you to control how image files are saved to a Storage Center
during a Load operation (see section 4.8 Load Image on page 25).
Tap the 'ENT' button to change this option.
• [ ] – Disabled (default). The system will analyze the Source's file system before building the
image. If the Source's file system is supported, the image will be a Brief image based on the file
system and data area. If the Source's file system is unrecognized the image will be a full sector
by sector image.
• [ ‫٭‬ ] – Enabled. When executing a Load process, the system will not analyze the Source's file
system and will automatically build the image sector by sector.

6.3.2 Copy Storage Source

The Copy Storage Source option allows you to make a duplicate of your Storage Center drive.
Tap the 'ENT' button to change this option.
• [ ] – Disabled (default). The system will analyze the Source's file system before duplication.
If the Source's file system is recognized as a Storage Center then the duplicator will ask you to
choose an image name to copy.
• [ ‫٭‬ ] – Enabled. The system will analyze the Source's file system before duplication. If the
Source's file system is recognized as a Storage Center then the duplicator will make a copy of
the entire Storage Center drive.

6.3.3 Skip Select Image

The Skip Select Image option allows you to set whether the duplicator asks you to select an image file
when it recognizes that the drive connected to the Source is a Storage Center.
Tap the 'ENT' button to change this option.
• [ ] – Disabled (default). The system will analyze the Source's file system before duplication.
If the Source's file system is recognized as a Storage Center then the duplicator will ask you to
choose a image name to copy.
• [ ‫٭‬ ] – Enabled. The system will analyze the Source's file system before duplication. If the
Source's file system is recognized as a Storage Center then the duplicator will automatically
make a copy of the image configured in the Select Image File option.
50
Troubleshooting