Kanguru KCLONE-7HDS-PRO User Manual page 17

3. Once all connected disks have been detected and initialized, the duplication process begins.
During duplication the screen will display the following information:
Current operation
Target drive indicator
WarNING! Do not disconnect any drives while they are in use. You can tell if a drive is in
use if the LED next to it is blinking. Wait for a solid green or red LED before disconnecting a
drive. If you want to cancel the current process, press and hold the 'ESC' button and wait for
a solid red LED to come on.
4. When the copy process has completed, you will receive a message saying "Remove xPS xFL",
where "x" indicates the number of drives that passed (PS) and failed (FL). Target drives that
passed will have a green LED displayed next to it. Target drives that failed the duplication
process will display a red LED next to it.
5. Tap the 'ENT' button to return to the Main menu.
Note: The duplicator will keep a running count of the number of passed and failed drives until
you change copy modes.
Number of target drives
brIEF CoPy
5 60.96G 25%
Data processed Progress indicator
brIEF CoPy 0
7 PaSS
17
7 250.0G
109Mb/s
0 FaIL
General Operation
Total amount of data
Transfer rate