Expansion (Exifu) Pcb (Figure 2-5)2 - NEC Aspila EX Hardware Manual

CÔNG TY VIỄN THÔNG VIỆT PRO
Section 2: PCB Installation and Startup
Expansion (EXIFU) PCB (Figure 2-5)
The EXIFU PCB provides a connection from the main cabinet to the expansion cabinet. This connec-
tion is required with any 2-cabinet setup. Included with the EXIFU PCB is a proprietary cable which
must be used to connect the main cabinet and expansion cabinets together.
To install an EXIFU PCB:
1.
2.
3.
2-14 Section 2: PCB Installation and Startup
Chuyên phân phối tổng đài NEC
Ensure that both the Main and expansion cabinets are powered off.
Install the EXIFU into the CPU/EXP slot in the expansion cabinet.
Note that the white PCB Pull Tab should always be positioned closest to the top of the
cabinet.
Install the EXIFU cable to the CN2 connector on the EXIFU PCB. Connect the opposite end
to the CN6 connector on the NTCPU.
Figure 2-5: EXIFU PCB INSTALLATION
http://vietpro.com.vn
Aspila EX Hardware Man-