NEC Aspila EX Hardware Manual page 135

CÔNG TY VIỄN THÔNG VIỆT PRO
8.
9.
Figure 4-24: CONNECTION FOR
RECORDING ONLY
10. Any cable connected to the ADA adaptor must pass
11. Position the adapter with the connector positioned as shown below.
12. Hook the two plastic prongs into the bottom of the phone.
13. Push the connector into place. The top latch on the top of the adapter should lock into place
14. Plug the line cord back into the system phone.
Aspila EX Hardware Manual
Chuyên phân phối tổng đài NEC
Replace the adapter cover and reattach the screw.
Connect the opposite end of the cable to the recording device or audio output.
two times (one turn) through the ferrite sleeve supplied
to comply with EMC requirements. The ferrite must be
located, on the cable, as near as possible to the ADA
adaptor.
Figure 4-26: POSITIONING THE ADAPTER
when it is properly positioned.
Section 4: Optional Equipment
Figure 4-25: CONNECTION FOR
PLAYBACK ONLY
Section 4: Optional Equipment
http://vietpro.com.vn
4
4-25