Securing The Main Cabinet To A Rack (Figure 1-13 - Figure 1-17)1 - NEC Aspila EX Hardware Manual

CÔNG TY VIỄN THÔNG VIỆT PRO
Securing the Main Cabinet to a Rack (Figure 1-13 - Figure 1-17)
1.
Figure 1-13: INSTALLING THE MOUNTING BRACKET ON THE RACK
Aspila EX Hardware Manual
Chuyên phân phối tổng đài NEC
Install the 19" rack mount bracket. The 19" rack mount bracket is not supplied with the cabi-
net and must be ordered seperately.
The cabinet will require approximately 400mm (9U) of height within the rack.
Note that the floor/wall mounting bracket supplied with each cabinet can be used for rack
mouning ONLY IF the rack enclosure has the mounting strips at the rear. The mounting
bracket is installed onto the rear mounting strips and the instructions for Securing the Main
Cabinet to the Wall (Figure 1-8 - Figure 1-12) are followed to install the cabinet(s)
Section 1: Installing the Cabinets
Section 1: Installing the Cabinets
http://vietpro.com.vn
1
1-