NEC Aspila EX Hardware Manual page 84

CÔNG TY VIỄN THÔNG VIỆT PRO
Section 2: PCB Installation and Startup
In-Skin Server/Router PCB Installation (Figure 2-17)
1.
2.
3.
2-42 Section 2: PCB Installation and Startup
Chuyên phân phối tổng đài NEC
Install the battery on the APSU PCB. The polarity "+" symbol must be on top.
If required, install the HDD or IDE Flash Memory to the CN4 connector.
When using an HDD or IDE Flash Memory, it should have an OS (operating system)
installed and application software.
Figure 2-17: INSTALLING THE APSU PCB
To insert the PC-ATA card, simply slide the card into the CN16 card slot, pushing firmly to
ensure proper connection.
To remove the card set the run/block switch to BLOCK and wait for the Status LED to turn off
before removing the card, this may take up to 3 minutes.
http://vietpro.com.vn
Aspila EX Hardware Man-