NEC Aspila EX Hardware Manual page 30

CÔNG TY VIỄN THÔNG VIỆT PRO
Section 1: Installing the Cabinets
10. Slide the shutters to the left to allow a pass-through for the EXIFU cables. Retighten these
11. Fit the DC power cable between the main cabinet BATT2 socket and the expansion cabinet
Figure 1-26: Fitting the DC Power Cable to the BATT2 socket
1-24 Section 1: Installing the Cabinets
Chuyên phân phối tổng đài NEC
screws.
Figure 1-25: MOVING THE FRONT PANEL SHUTTERS
BATT2 socket located on the left hand side of each cabinet. The DC power cable is required
when battery backup is installed, it is used to power both cabinets from a single battery box.
Unscrew the cable guide at the rear left side of the main cabinet to allow access for the DC
power cable.
Connecting the DC Power
Cable.
Unscrew the cable guide.
http://vietpro.com.vn
Aspila EX Hardware