Repackaging Instructions - Tektronix ECO422D Instruction Manual

Maintenance

Repackaging Instructions

Identification Tag
Repackaging for Shipment
6- 22
If the instrument is to be shipped to Tektronix Service Center for service or
repair, attach a tag to the instrument showing:
1. Owner (with complete address) and the name of the person at your firm that
can be contacted.
2. Instrument serial number and a description of the service required.
Repackage the instrument in the original manner to provide adequate protection.
If the original packaging is not available or is unfit for use, repackage the
instrument as follows:
1. Obtain a corrugated cardboard carton whose inside dimensions are at least
six inches greater than the dimensions of the instrument to allow room for
cushioning. The shipping carton should have a test strength of at least 275
pounds.
2. Surround the instrument with polyethylene sheeting to protect the finish.
3. Cushion the instrument on all sides by tightly packing dunnage or urethane
between the carton and the instrument. Allow three inches on all sides for
cushioning.
4. Seal the carton with shipping tape or an industrial stapler.
ECO422D SD/HD Changeover Unit Instruction Manual