Inline St - Mitsubishi Electric MELSEC iQ-R Series Programming Manual

5.2

Inline ST

The inline ST is the function used to create an inline ST box that displays an ST program in the cell of the instruction
corresponding to a coil in the ladder editor, and edit and monitor it.
This function enables to create numerical operations and character string processing easily in ladder programs.
• Program that does not use the inline ST
• Program that uses the inline ST
• The inline ST cannot be used in safety programs.
• The inline ST cannot be used in the Zoom editor of SFC programs.
Specifications
For the specifications of the inline ST, refer to the specifications of the ST language.
Page 59 STRUCTURED TEXT LANGUAGE
5 LADDER DIAGRAM
56
5.2 Inline ST