Storing The Detector; Recycling; Storing Chemcassette Cartridges - Honeywell SPM Flex User Manual

To replace the real-time coin battery
The battery can be removed by gripping it firmly with needle-nose pliers and
pulling straight out� Gently press the new battery with the positive (+) side facing
out until it snaps into place�
Figure 26. The real-time coin battery
To clean the exterior surfaces
Exterior surfaces of the detector can be cleaned with a soft cloth moistened with
water or with 6% IPA alcohol wipes� Plug the detector's ports when washing the
case�

Storing the detector

When storing the detector with the power adaptor plugged in, the rocker switch
can be left in the on position; the battery will continue charging� The detector can
also be charged with the rocker switch off�
When storing the detector without being plugged into the power adaptor, turn the
rocker switch off� This will minimize the power� This is the recommended setting
for long-term storage or for transporting the detector� Charge the detector at
least four hours every three months�

Recycling

At the end of its usable life, return the detector to Honeywell Analytics for
recycling�
Storing Chemcassette
Follow the instructions on the cartridge label for acceptable storage
temperatures and expiration dates�
Real-time
coin battery
cartridges
®
SPM Flex Gas Detector
49