Standard Mounting Bracket - Honeywell SPM Flex User Manual

SPM Flex Gas Detector

Standard mounting bracket

Figure 19 shows the detector's standard mounting bracket�
drilling holes:
10.2 in. (26.0 cm)
0.6 in. (1.6 cm)
Figure 19. Standard mounting bracket
At least 2 screws must be used when mounting the standard bracket to a wall�
Use the bracket as a template for determining the location of the holes to be
drilled in the wall� See the Specifications section on page 52 for a description of
the appropriate screws�
28
6.3 in.
(15.9 cm)
12.5 in. (31.8 cm)