Intermec CN30 User Manual page 91

Configuring the CN30 for Your Network
Configuring Serial Communications
Configuring 802.11b/g Radio Communications
CN30 Mobile Computer User's Manual
The CN30 is a versatile Mobile computer that you can easily add to your
wired or wireless data collection network. You can connect your CN30 to
your network using:
•
Serial communications
•
802.11b/g radio communications
•
Ethernet communications
•
Bluetooth™ radio communications
The CN30 has a serial port to transfer data to and receive data from
another device via RS-232 communications. You can also insert the CN30
into a communications dock to transmit data to and receive data from a
host computer or PC using RS-232 communications. The serial cable and
the communications dock are sold separately. For more information on
accessories and how to order them, see page XX.
To use serial communications with your CN30
1 Turn off the CN30.
2 Connect the CN30 to the serial port of another device. You can do
this in one of the following ways:
•
Connect the CN30 serial port to the serial port of the other
(26-pin to DB9-pin) serial cable adapter and a female-to-female null
modem RS-232 cable.
•
Connect the AD9 charge dock to the
DB9-pin to DB9-pin serial adapter cable. Insert the CN30 into the
dock.
3 Turn on the CN30.
Make sure all components with antennas are at least 30 cm (1 ft) apart
when power is applied. Failure to comply could result in equipment dam-
age.
Attention: Assurez-vous que la distance entre tous les éléments avec
antennes soit d'au moins 30 centimètres (un pied) avant de faire la connex-
ion avec l'alimentation électrique, faute de quoi vous risquez d'endom-
mager votre installation.
The wireless CN30 has an internal 802.11b/g radio to transfer data using
wireless communications. This section of the manual assumes that you have
Chapter 4 — Network Support
device using the
serial port of the other device using a
63