Intermec CN30 User Manual page 20

Chapter 1 — Using the CN30 Mobile Computer
Magnifier Application
Using the Power (I) Key
10
The Magnifier application allows you to view an enlarged portion of the
CN30 Computer screen by tapping and holding the stylus. The enlarged
window can be moved to any location on the screen.
To Start Magnifier
1 On the 14-key or 56-key keypad, press the orange key. Press the Magni-
fier key.
2 Tap and hold the stylus to move the displayed area of the screen. For
more help see the Magnifier help under Windows help.
Note: The Magnifier window is only a display window.
When you press the (I) key to turn off the CN30, you actually put the
CN30 in Suspend mode. In Suspend mode, the CN30 continues to supply
power to all memory, but turns off power to most hardware. This power-
saving feature is designed to prolong battery life.
When you press the (I) key to turn the CN30 back on, your computer
resumes where it was when you turned it off.
If you are using WPA or 802.1x security, the computer may need to reau-
thenticate before it starts your application.
If the Battery light flashes and your CN30 does not resume after pressing
(I), your battery may be too low to supply power. Replace the battery. If
replacing the battery does not solve the problem, see "Booting the CN30"
on page 122.
CN30 Mobile Computer User's Manual