1. Important Things to Remember
The J2KN Pro meets the requirements of EPA
CTM-030 and CTM-034 and ASTM D-6522 test-
ing protocols for portable emission analyzers.
In order to receive accurate measurements,
The J2KN Pro is not suitable for continuous
emission testing. Please allow at least 10
minutes of fresh air purge for each hour of
The following substances may cause damage
to the electrochemical sensors:
1. Charge the battery after each use
2. Always store unit with fully charged battery
3. Charge the battery at least once a month if
not in frequent use
please allow reading to stabilize
for at least 2 minutes.
testing.
Cleaning agents
Degreasers
Wax polishes
Adhesives
Formaldehyde
Page 4
Need help?
Do you have a question about the J2KN pro and is the answer not in the manual?
Questions and answers