Wiring Products - Mitsubishi Electric MELSEC iQ-R Series User Manual

6.3

Wiring Products

Application connector
Use 5-pin open style connectors.
For details on signal layout, refer to the following.
Page 23 Terminal name of terminal block
CAN bus cable
Wire the CAN bus cable that meets the following specifications.
Item
Cable type
Number of pairs
Applicable standard
*1
Wire diameter
Impedance
*1 The maximum wire diameter of the included terminal block is 2.5. To use the cable with wire diameter exceeding 2.5, use a
terminal block suited for the wire diameter of a cable used.
Cable specifications of the CAN bus cable available vary depending on the cable length.
Cable length
0 to 40m
40 to 300m
300 to 600m
600 to 1000m
For compatible CAN bus cables, contact CiA.
For contact information, refer to the following.
www.can-cia.org
Terminating resistor used
In the CANopen network and CAN network, CAN+ and CAN- of the both ends of the network require a terminating resistor at
120 (100 to 130). A 121 1/4W resistor comes with this product.
Description
Shielded twisted pair cable
2
ISO11898
0.2 to 3.3 (24 to 12 AWG)
120 (95 to 140)
Wire diameter
0.25 to 0.34
0.34 to 0.60
0.50 to 0.60
0.75 to 0.80
Resistance per 1m
70m
< 60m
< 40m
< 26m
6 WIRING
6.3 Wiring Products
6
25