Mbgp4+ Troubleshooting - Edge-Core ES4624-SFP Routing Management Manual

SwitchC(config-router-af)#neighbor 2003::4 activate
SwitchC(config-router-af)#exit-address-family
SwitchC(config-router-bgp)#exit
SwitchD configuration as follows:
SwitchD(config)#router bgp 200
SwitchD(config-router-bgp)#neighbor 2003::3 remote-as 200
SwitchD(config-router-bgp)#neighbor 2002::2 remote-as 200
SwitchD(config-router-bgp)#address-family IPv6 unicast
SwitchD(config-router-af)#neighbor 2002::2 activate
SwitchD(config-router-af)#neighbor 2003::3 activate
SwitchD(config-router-af)#exit-address-family
SwitchD(config-router-bgp)#exit
Here the connection between SwitchB and SwitchA is EBGP, and the connection between
SwitchC and SwitchD is IBGP. The BGP connection can be processed between SwitchB and
SwitchD without physical link, but the premise is a route which reaches from one switch to the
other switch. The route can be obtained by static routing or IGP.

1.9.5 MBGP4+ Troubleshooting

It is the same as corresponding section of BGP
246