Anshcpu Error Code List - Mitsubishi A1SJH(S8) User Manual

11. TROUBLESHOOTING

11.3.2 AnSHCPU error code list

Table 11.1 shows the error messages, description and cause of error and corrective
actions for A1SJH(S8), A1SH and A2SH(S1). Detailed error codes are stored in D9092
only when a dedicated instruction for CC-Link is used.
Error
Error Message Code
(D9008)
"INSTRCT. 10
CODE ERR"
(Checked at
STOP RUN.)
"PARAMETER 11
ERROR"
(Checked at
power-on or
STOP/PAUSE
RUN.)
"MISSING END 12
INS."
(Checked at
STOP RUN.)
Table 11.1 AnSHCPU Error Code List
Detailed
CPU
Error
module
Code
status
(D9092)
— Stop Instruction code, which cannot be
decoded by CPU module, is included in
the program.
(1) Memory cassette including instruc-
tion code, which cannot be
decoded, has been loaded.
(2) Since the memory contents have
changed for some reason, instruc-
tion code, which cannot be
decoded, has been included.
101 Instruction code, which cannot be
decoded by CPU module, is included in
the program.
(1) Memory cassette including instruc-
tion code, which cannot be
decoded, has been loaded.
(2) Since the memory contents have
changed for some reason, instruc-
tion code, which cannot be
decoded, has been included.
103 Device specified by a dedicated
instruction for CC-Link is not correct.
104 A dedicated instruction for CC-Link has
incorrect program structure.
105 A dedicated instruction for CC-Link has
incorrect command name.
— Stop The contents of parameters of CPU
memory have changed due to noise or
the improper loading of memory.
— Stop There is no
the program.
Error and Cause
( ) instruction in
END
FEND
11 - 12
Corrective Action
(1) Read the error step by use of periph-
eral equipment and correct the pro-
gram at that step.
(2) In the case of memory cassette,
rewrite the contents or replace the
cassette with a memory cassette
which stores correct contents.
(1) Read the error step by use of periph-
eral equipment and correct the pro-
gram at that step.
(2) In the case of memory cassette,
rewrite the contents or replace the
cassette with a memory cassette
which stores correct contents.
Read the error step using a peripheral
device and correct the program of the
step.
(1) Load the memory cassette correctly.
(2) Read the parameter contents of CPU
memory with a peripheral device,
check and correct the contents, and
write them to CPU again.
Write instruction at the end of
END
program.