Setting A Gate Size Used For Tracking; Displaying A Tt Limit Ring; Adjusting Mbs - JRC JMR-7230-S3 Instruction Manual

19.2.6.5 Setting a gate size used for tracking

1
Select a gate size from the [Gate Size] combo box.
- Small
- Medium
- Large

19.2.6.6 Displaying a TT limit ring

1
To display a TT limit ring, select the [Limit Ring] check box.

19.2.7 Adjusting MBS

MBS (Main Bang Suppression) adjustment is to adjust a display unit processing circuit in order to
suppress main bang, which is the reflection signal from a microwave transmission circuit of a
waveguide that normally appears as an image of a circle at the center of the radar screen.
Perform MBS adjustment by using the "MBS" dialog.
Do not change Initial Level/Area Offset indiscreetly.
If wrong adjustment is performed, the nearest target will be erased,
causing collision to lead to death or serious injury.
Section 19 Adjusting and Setting up Equipment (for Services) 19-16