Confirming The Alert Sound [Sound Test] - JRC JMR-7230-S3 Instruction Manual

4
Operate the keys, buttons and dials in the operation unit.
If the performance of the operation unit is normal, the colors of the keys, buttons and dials are
changed.
5
Click on the [Key Test Stop] button after the operation check.
Returns to the "Diagnosis" dialog box.
21.4.4

Confirming the alert sound [Sound Test]

Confirm the alert sound.
1
Click on the [Menu] button on the left Toolbar.
The menu is displayed.
2
Click on the [Maintenance] - [Diagnosis] - [Sound Test] button on the menu.
3
Click on the [Sound Test Start] button.
A sound test starts. All the available beep sound volumes can be tested by increasing the level
from 0.
Section 21 Maintenance & Inspection 21-32