JRC JMR-7230-S3 Instruction Manual page 39

Setting Item
Sentence
Selectable baud rates
Serial port
Serial point on CCU
Gyro (at selection of Heading Sensor (NMEA) )
Gyro (at selection of Heading Sensor (Gyro I/F) )
Log (at selection of Log (NMEA))
Log (at selection of Log (Gyro I/F))
GPS
AIS
Serial port on SLC/ALC
CH1-8
CH9/10
Gyro I/F
Setting the same contents for SLC (Main) and SLC (Sub)
The setting of SLC (Sub) can be changed to the contents that are set for SLC (Main) collectively.
When there is a different connection between SLC (Main) and SLC (Sub), the setting is changed
individually after this operation.
1
Select the tab of the SLCx (S) to be set (x:1 to 8).
2
Click the "Same as SLCx (Main)" button.
The value that was set in SLCx (Sub) is changed to the same content as that of SLCx (Main).
Description of Setting
Select the sentence of Alert Handling.
Displayed when the sensor is other than "Alert
(BNWAS), "IAS (MODBUS)", or "DSC".
4800/38400
Fixed to 38400
Fixed to 4800
Fixed to 38400
Fixed to 4800
Fixed to 38400
2400/4800/9600
2400/4800/9600/19200/38400
Fixed to 38400
19-27
Setting Value
Normal sensor such as GPS
and Log:
-/ALR/ALF
"Alert (from Subsystem/to
CAM) ":
ALR/ALF
Baud rate
Section 19 Adjusting and Setting up Equipment (for Services)
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B