JRC JMR-7230-S3 Instruction Manual page 52

Upper Part of the Playback Controller
Number Name
1 Playback time
2 [X] (Close) button
3 Playback slider
4 View switch buttons
[Control] Section
Number Name
5 Playback speed
selection box
6 Playback button
7 Pause button
8 Stop button
9 Drive selection box
10 Folder tree
11 Playback start time
12 Playback segment
13 Playback end time
14 Playback list
Playing Back Data Recorded During Navigation
Section 20
The playback time is displayed.
Exits playback.
The progress of playback is displayed. The playback position
can be changed by moving the slider control.
•
During playback, the pointer of the playback slider cannot be
dragged.
• During halt/temporary halt, the pointer of the playback slider
cannot be dragged to any position.
Switch between full display/simple display of the control unit
and the playback information unit.
Select the playback speed from the list. (x1, x2, x4, x10, x30,
x60)
Executes playback. When this button is clicked during playback,
the playback speed changes in the following order: x1 ⇒ x2 ⇒
x4 ⇒ x10 ⇒ x30 ⇒ x60 ⇒ x1 ⇒ .....
Pauses playback. To resume, click the Playback button again.
Stops playback. When playback is stopped, the playback time
returns to the playback start time and the playback slider control
returns to the playback start time position.
Select a data drive storing navigation record data from the list.
Folders storing navigation record data are displayed in tree view.
The playback start time is displayed. By clicking the calendar
icon, you can display the calendar picker and change the
playback start time.
Specify the playback time range concurrently with the playback
end time. The range can be specified within the range from the
start to the end of the recording of the log data.
The playback segment is displayed. (When a playback list has
not been selected, this box is blank.)
The playback end time is displayed. (When a playback list has
not been selected, this box is blank.) By clicking the calendar
icon, you can display the calendar picker and change the
playback end time.
Specify the playback time range concurrently with the playback
start time. The range can be specified within the range from the
start to the end of the recording of the log data.
Each record data is displayed in the order of the oldest time to
the latest time. When [Oldest Date] or [Latest Date] on the title
bar is clicked on, the data is sorted in the order of the oldest data
or latest data.
20-4
Function
Function